butch
New Member
Posts: 3
|
Post by butch on May 28, 2009 8:13:35 GMT -5
hello-new here
i have a 2000 pw 50 and having problems
my son was riding and the bike just died. i have done a compression check, handle bar switch check, spark check, coil check, gas check, throttle and choke cable check, exhaust check, air cleaner check and all seams good. i did notice after it died the spark plug was wet so i changed it and it still wont start. i even poured gas in the cylinder at the spark plug and it still wont fire. can any one help??
|
|
|
Post by bemerox on May 29, 2009 14:38:47 GMT -5
looks like it needs a engine rebuild
|
|
butch
New Member
Posts: 3
|
Post by butch on Jun 4, 2009 9:59:50 GMT -5
i brought the bike into my work and our maintence guy thinks their is no spark or weak spark-just bought the ignition kit from this site and will update when i get them
|
|
|
Post by pacemkr86 on Jul 10, 2009 21:26:25 GMT -5
any updates?
|
|
butch
New Member
Posts: 3
|
Post by butch on Jul 23, 2009 8:22:02 GMT -5
kit did not work-all wire colors did not match when plugged together-bike would only run in the start mode. very unhappy with experience- bike is in landfill in elk river mn
|
|