Pw80 Zinger sagging suspension rear

[tommypw]

I have a 2001 PW 80 Zinger that runs pretty good, but i think the suspension is shot.  Even without any weight, the bike sags and looks like its going to hit the fender on its own.  I don't know if this is normal, but it doesn't seem normal. Im trying to decide if buying a new rear shock will fix this problem or not.  Let me know if anyone has any ideas or knowledge on this.  it also has a gas leak and i am trying to figure out what i should do about that.  If anyone knows, let me know
thnaks

[jussi]

Seems that the forum is almost dead but in case that you are reading..

Gasoline leak is probably caused by leaking needle jet. It doesn't close and the float chamber floods.

PW80 rear is low even with a working shock. If you want to raise it, you need to extend your shock.
Check my photo, first there is stock rear shock and below there is ~1 inch extender. If your fender is lower than that, then it might be shot.


yamahapw80.wordpress.com/