|
Post by tdreyer on Jan 12, 2009 15:41:38 GMT -5
???I'm trying to sort out some issues with this new to us PW50. I really want to disable the oil injection. Will order the block off but what to do until as a quick fix. Small ball bearing in the line to the carb? Is that right? When I get the block off what do I do about the line to the carb? I guess what I'm asking is what exactly have any of you done to bypass the oil injection?
|
|
|
Post by turbomart on Mar 12, 2009 18:58:27 GMT -5
|
|
|
Post by jase on Apr 5, 2009 17:15:06 GMT -5
hi, i clipped the pipe both ends leaving about an 1/2 inch of tube, put super glue in and closed them off with a pair of pliers untill the glue set. I unscrewed the pump and broke the two lugs of inside to stop it pumping oil. May not be the most proffesional solution but it works well and is very easy to do.
|
|
|
Post by bemerox on May 29, 2009 14:35:04 GMT -5
leave it the way it is. i think then you have to pre mix and that sometimes damages the bike
|
|