|
Idle
Nov 25, 2008 14:37:58 GMT -5
Post by mike baker on Nov 25, 2008 14:37:58 GMT -5
I have an 03 pw50 that will not idle down right. If I rev the motor and release the throttle it takes awile to rev down. When you grab the rear brake it seems to help it some, but it's not right.
|
|
rhyd
New Member
Posts: 8
|
Idle
Nov 26, 2008 13:41:59 GMT -5
Post by rhyd on Nov 26, 2008 13:41:59 GMT -5
sticky throttle cable maybe, try a new one
|
|
|
Idle
Nov 30, 2008 14:09:43 GMT -5
Post by argonaught on Nov 30, 2008 14:09:43 GMT -5
i have the same problem, it is impossible to adjust the idle on the carb. Are you running pre mix with a single cable or the dual throttle cable with the oil pump? I am using the dual cable and have adjusted it as the clymer manual advises, working back from the carb with 10mm movement in the lower end of the cable and a small amount at the top. It still dosent settle correctly! Let me know how you get on, if i find a solution ill post it. A few things i tried that may help you in the mean time: put some oil down the cable, ensure it is routed correctly and not forced or bent to harshly, make sure it is adjusted correctly check spring in the carb and on throttle return
cheers jase
|
|
|
Idle
Dec 2, 2008 10:24:45 GMT -5
Post by mike baker on Dec 2, 2008 10:24:45 GMT -5
I am running premix with a split cable. I left the cable hooked up because it helps return the throttle. I unhooked the line running from the injector pump to the carberator and plugged it so it wouldn't suck air into the carborator.
|
|
|
Idle
Dec 10, 2008 17:38:01 GMT -5
Post by unlisted on Dec 10, 2008 17:38:01 GMT -5
had the very same problem with my 2000. get it running and back out the air screw in small increments. Mine ended up just about 2 full turns out and bike runs and idles great. good luck.
|
|
|
Idle
Aug 12, 2020 12:35:57 GMT -5
Post by vaperbrant on Aug 12, 2020 12:35:57 GMT -5
Good morning! I was wondering if anybody on pw50webmaster.proboards.com is able to assist me with picking new eliquid companies for our <a href=https://allvapebrands.com>global vape marketplace</a>? In about 2 weeks, I will be expanding my eliquid stable by taking on these ejuice lines : P-Vaper Original Made In USA E-liquid, Air Factory Eliquid, Crumbz Vapor , Juicy Ohms E-Juices and Vapery Sitty eJuice. Has anyone tried these brands?
|
|