|
Post by alexburns1986 on Oct 30, 2012 3:48:46 GMT -5
hey guys am new to the forum
i bought a pw50 for my daughters christmas and it wasnt till i started stripping it i found out the throttle doesnt return was told it's at the oil pump side? Anyone be able to help me on this thanks Alex
|
|
|
Post by steveh on Feb 13, 2013 11:24:48 GMT -5
Your throttle cable is split into two parts.
1) to the carburator 2) to the oil injector
You need to take the exhaust off, then the cover for the oil injector pump, (it is on top of the motor right side), realign the cable onto the pulley and it should be free moving. crank the throttle and make sure it has full movement without any binding in the oil and carb portion.
if I had a photo I would post.
|
|