|
Post by cmramsey on Oct 16, 2008 11:05:59 GMT -5
I need to replace the crankcase gasket. its leakin oil. Does anyone know the best way to get the cover off? I'm hoping to not have to pull the entire motor.
|
|
|
Post by argonaught on Oct 18, 2008 12:43:26 GMT -5
You do have to remove it from the frame, i would recommend getting a Clymer manual as i dont think is that straight forward.
|
|
|
Post by pete on Jan 8, 2009 20:03:10 GMT -5
;)you can undo the springs so the motor moves up and down remove the screws at the top then tie the rear tire to the frame were the seat is and you can remove the last to screw it will slide out pretty simple
|
|