|
Post by doctrhu on Oct 13, 2008 14:54:39 GMT -5
There are 2 screws on the Carb on this pw50 what should i set them at ? i did get it running but stalls after 15 seconds
|
|
|
Post by argonaught on Oct 18, 2008 12:34:19 GMT -5
the air/fuel mix should be screwed fully in then back it of about 1 3/8 turns. This is the default setting. Screw it in to enrich the mixture and out to make it leaner. The larger screw with the spring on is the idle adjustment this should be running low enough that the wheel dosent turn when run is engaged to give compresion braking when riding.
|
|
|
Post by crownman on Dec 29, 2008 12:16:38 GMT -5
Thank U
|
|