|
|
Post by peter on Dec 18, 2009 14:12:48 GMT -5
hi all got a lil prob my lil voys peewee starts fine in the start position but when i put it to run it dies can anyone help thanks
|
|
|
|
Post by WAXKUTTR on Dec 19, 2009 19:14:40 GMT -5
Try turning the screw on the carb with the spring around it. may help!
|
|
|
|
Post by peter on Dec 20, 2009 5:06:10 GMT -5
it seems to be something with the spark in th start postion its very stong but when put to run it goes very week and hard to see
|
|
|
|
Post by Waxkuttr on Dec 21, 2009 19:34:32 GMT -5
try disconnecting the clip under the number plate....the kill switch should still work but im not sure if it will help you.......
Go to Thumper Talk and ask those guys in the Peewee forum.......good people
|
|
dean
New Member
Posts: 1
|
Post by dean on Mar 31, 2013 14:56:21 GMT -5
Yes I've got The same problem, the bike was running fine until I washed it now it starts first kick but when I. Turn it to run the engine dies...
|
|
|
|
Post by JMFRAZZ on Aug 14, 2013 16:43:15 GMT -5
It is the connector behind the number plate that connects the wiring harness from the handlebar switch. Take the connector apart and blow it out with compressed air. Make sure that all of the individual connectors are clean and dry. Then put the connector back together. This should solve the problem. I have seen this happen from washing the bike and getting the connection wet.
|
|
