|
Post by Bruce on Oct 8, 2009 21:43:41 GMT -5
I received a new CDI for my 2005 PW 80 today. The unit is not an exact match for the old unit. It uses different connectors (these are multi connectors where the original are all single wire connectors) and has at least one extra wire (red with white).
Does any one have instructions for wiring this unit into the system?
|
|
|
Post by clownpuncher on Oct 8, 2009 23:55:17 GMT -5
|
|
|
Post by Bruce on Oct 22, 2009 23:04:57 GMT -5
Thanks for the link to the manual. The problem is the wiring diagram in the manual does not have a red/white wire from the CDI. The part supplied by this site does have the extra wire. The question now is will the CDI work if that wire is not connected to something?
|
|
|
Post by agentfoot on Oct 24, 2009 14:28:46 GMT -5
If I was you first I'd double check that it's the right part. Then if it is I'd contact the manufacturer to see if they can assist you. If all else fails hook up the matching wires, leave the extra not connected and see if it works.
|
|