|
Post by bell927 on Aug 20, 2009 20:32:01 GMT -5
I went and purchased a repair manual after 2 days of tinkering with the bike in my garage. I dismantled the bike even more and noticed after closer inspection that the gear on the kick shaft has a hair line crack at the weld that connects it to the shaft itself. I also noticed that the gear was bent outward. I banged it straight with a hammer and it is working fine. Now that I know that was the problem I will most likley have it re-welded or just replace the part. I would say thanks for the help but no one responded even though I did have several views. Was I blackballed for violating some PW50 code?... I may never know? Anyway, I think the problem is solved and so all is well.
|
|
|
Post by quadracer on Aug 21, 2009 14:13:20 GMT -5
ppl on reply when they have a good answer, wasn't described very well in the first post really man we don't always need to know the "whole" story and thats basiclly all you told us.
|
|