rhyd
New Member
Posts: 8
|
Post by rhyd on Nov 26, 2008 13:49:56 GMT -5
when you turn the ear wheel it gives off a grinding noise. after stripping the wheel down i noticed that it was coming from in the drive shaft. ive bought the 2 sets of bearing to replace them but was just wondering if somone could give a little 'how to' on things i need to do, like greasing the bearings and internals, how much grease etc..anything to be aware of
cheers
|
|
|
Post by argonaught on Nov 30, 2008 14:14:14 GMT -5
i know its not what your looking for but go to ebay and get a Clymer instruction manual, it tells you how to do everything on the PW50, it is money well spent i assure you
|
|