dylan
New Member
Posts: 3
|
Post by dylan on Sept 6, 2008 9:54:39 GMT -5
 i want to pre mix the oil and chuck the oil pump away but dont know were to put the throttle cable
|
|
|
|
Post by argonaught on Oct 6, 2008 13:34:39 GMT -5
You can leave it all in place and just plug the oil feed to the carb with a small ball bearing. I have heard of people removing gears to stop the pump working but the ball bearing works and lots of people do this. Just keep the pump clean and lubed to avoid problems if connecting in the future.
|
|
