|
Post by dalejsmall on Jul 3, 2008 13:17:14 GMT -5
We picked up a used PW ;D and now the fork seal look like they are leaking. What weight oil do they need and what is fill level? (IT IS AMAZING THAT THEY RUN WITH ONLY 40psi COMPRESSION, BUT STARTS HARD without either) Now with the New TOP end, she's up to about 100 psi, is this about right?
|
|
|
Post by Kevin on Jul 7, 2008 12:49:25 GMT -5
I'm also curious about the fork oil type and quantity, although I realize on these forks the oild is purely for lubrication....
100 lbs of compression is good to go, BTW !
|
|
|
Post by Kevin on Jul 28, 2008 16:26:39 GMT -5
I learned from a local shop that the PW-50 forks just come with bearing grease inside...Just replace the fork bushings and seals and dob some grease inside during reassembly....Good to go !
|
|