|
Post by Becka on Apr 18, 2011 21:05:58 GMT -5
I bought my son a little pw50 the other day and the guy didnt really tell me much about it (i knew it had been sitting awhile so i took it to the shop to have it all cleaned out really good). But i cant figure out what year it is. Its purple and white mainly with some red/gold on the graphics and the sticker model code is yam4x40049. does anyone have any ideas? I know it is the original plastics because they could probably use getting replaced once my son knows how to ride better. Thanks for any help!!!
|
|
|
Post by wingding on Apr 18, 2011 22:50:16 GMT -5
if its white with a purple seat and purple graphics is 93-94 ish
|
|
|
Post by adamfozz on Jun 1, 2011 4:29:58 GMT -5
I bought my son a little pw50 the other day and the guy didnt really tell me much about it (i knew it had been sitting awhile so i took it to the shop to have it all cleaned out really good). But i cant figure out what year it is. Its purple and white mainly with some red/gold on the graphics and the sticker model code is yam4x40049. does anyone have any ideas? I know it is the original plastics because they could probably use getting replaced once my son knows how to ride better. Thanks for any help!!! Check the frame number again. It looks like you might be missing one number after the 4x4. If not its an 81. Adam_Fozz
|
|
sully
New Member
Posts: 1
|
Post by sully on Jun 7, 2011 13:13:14 GMT -5
Hi could somebody help me please, I've bought a pw50 and it won't rev, it starts no problem when I put the switch to run nothing happens,I've cleaned carb out an checked fuel is getting through, new petrol I've taken exhurst off and tried it without it on and nothing the air filter is clean, it seems like the clutch isn't engaging for some reason, I've checked throttle cable that is fine
PLEASE CAN SOMEONE HELP ME IM GETTING A HEAHACHE NOW
|
|
|
Post by racedadsd on Jan 28, 2012 14:40:04 GMT -5
Check for sure your muffler is not clogged...just happened to me this weekend...ran a ziptie down it and wow power back...After the day I cleaned it out with oven cleaner-runs very well now.
|
|