|
Post by Matt Hagan on Sept 30, 2014 17:36:23 GMT -5
hello all, I just replaced my OEM throttle assy with an aftermarket assy and found that the plug ins do not mate up. my original is a 4 prong and the aftermarket is a 3 wire flat type. there is a black and another red and black that is off to the side of the plug. I cut off the old OEM plug and tried to splice by matching the wire colors. kind of worked, but it seemed to all work backwards!! start was the run, run was the start, and off didn't turn the d**n thing off!! Please help if you know how to do this. thanks!!
|
|